Landlords and property managers running rental properties in Lakeland deal with electrical problems on a different timeline than homeowners do. A tenant calls about a dead outlet or a tripping breaker, and the clock starts immediately. Delays cost tenancy relationships, and deferred repairs become code issues. We handle electrical work throughout Lakeland for property managers who need a clear scope, a straight price, and work done to the standard that holds up when an inspector or a new tenant looks at it.
We cover the full range of residential and commercial electrical work: panel repairs and upgrades, circuit additions, outlet and switch installation, lighting, ceiling fans, wiring repairs, whole-home rewiring, generator hookups, surge protection, pool wiring, EV charger circuits, and safety inspections.
Call (813) 519-5955 to describe what you need and get a price before anything is scheduled.
A homeowner dealing with a wiring problem can usually work around it for a day or two. A landlord with a tenant in the unit cannot. We scope electrical work for rental properties with that in mind, which means giving you a clear answer about what is wrong, what it takes to fix it, and what the work will cost before we schedule the visit.
For property managers running multiple units across Lakeland and the surrounding area, we handle between-tenancy electrical work, code-compliance repairs flagged during inspections, and circuit additions for appliances or updated layouts. When the property is being turned over, we can assess the panel and the branch circuits, identify anything that needs attention before the new tenant moves in, and write it up clearly so you have a record of what was done.
Call us at (813) 519-5955 and a person who knows the trade will scope the job on the call.
When we open up a wall or a panel and find work somebody else did, the first question is whether it is fixable or whether it needs to come out entirely. The answer depends on what the wiring actually is, how it was run, and whether bringing it up to code means correcting a connection or replacing a whole circuit.
A loose connection at a junction box, an undersized breaker, or a missing GFCI device are corrections. They are addressed at the point of the fault without disturbing the rest of the circuit. Wiring that was run without a ground, spliced without a box, or buried in a wall without access is a different situation. We explain the difference clearly before any work begins, and we do not replace more than the job requires.
The same logic applies to aluminum branch-circuit wiring, which is common in Lakeland properties built in the 1960s and 1970s. The wiring itself does not always need to come out. What matters is how the connections are made and whether the devices are rated for aluminum. We assess what is there, explain the options, and give you a price that reflects the actual scope.
We know schedules shift, so we keep booking flexible for properties where a repair cannot wait. Emergency calls are answered during our hours, which run every day from 8:30 AM to 10:00 PM. If a breaker has stopped resetting, an outlet is sparking, or a panel is showing signs of overheating, those are not situations to sit on.
Call (813) 519-5955 and we will work out what the schedule allows.
For businesses and tenants who have to stay operational during electrical work, we scope the job on the call so you know exactly which circuits will be affected and for how long. Panel work that requires a full shutoff gets scheduled with that in mind. Circuit additions and outlet work can often be done without interrupting the rest of the property. We tell you what to expect before we arrive, not after. Everything covered is listed on the electrical service list.
When electrical work is complete, we test every circuit and device that was part of the job. Outlets are checked for correct wiring, polarity, and grounding. GFCI and AFCI devices are tested to confirm they trip and reset correctly. Panel breakers are confirmed to be properly seated and matched to the circuits they protect.
For larger jobs, including panel replacements, rewires, and subpanel installations, we label circuits clearly so the panel directory reflects what is actually in the building. That matters when the property changes hands or when a future electrician needs to understand the layout without guessing.
Work in this area gets done to the code inspectors here actually enforce. That means the documentation we leave behind is useful, not just a formality. A completed safety inspection or a post-rewire report gives a landlord or a buyer a clear picture of the electrical condition of the property at that point in time. It is worth having before a sale and worth requesting before signing a lease on a commercial space.
The price for electrical work depends on what the job actually involves. What the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change are the things that move a quote in either direction. We give you the rate on the call, before anything is scheduled, and the price reflects the scope as we understand it from your description.
If we arrive and find something that changes the picture, we explain it and give you a revised figure before we proceed. You can ask what the price covers at any point and get a straight answer.
Call (813) 519-5955 to get a quote on the job you need done.
A dryer, a range, a dishwasher, or a refrigerator that shares a circuit with general-use outlets puts ongoing stress on the wiring and the breaker. When an appliance trips its breaker mid-cycle or the breaker runs warm, the right fix is usually a dedicated circuit sized for the load that appliance actually draws. We run the circuit from the panel, size the breaker correctly, and install the outlet or connection the appliance requires. EV charger circuits follow the same logic: a 240-volt dedicated run from the panel, with the panel capacity checked before anything is scheduled.
Recessed lighting, LED retrofit fixtures, pendant lights, and under-cabinet lighting all involve more than swapping a bulb. The circuit has to carry the load, the box has to be rated for the fixture, and the wiring has to be correct at every connection point. We handle new lighting installations and fixture replacements throughout Lakeland, including rooms that do not currently have a switched ceiling box and need one added.
Ceiling fan installation is part of the same work. A fan that wobbles, hums, or trips a breaker is usually dealing with an undersized box, a loose connection, or a circuit that was not designed for a motor load. We assess the existing setup and correct it as part of the installation.
Properties built in Lakeland during the 1960s and 1970s often have aluminum branch-circuit wiring throughout. The wiring itself is not the problem. The problem is what happens at the connection points where aluminum meets copper or where aluminum terminates at a device that was not rated for it. Heat builds up at those points over time, and that is where the risk lives.
Remediation involves inspecting every connection in the affected circuits, installing approved connectors where needed, and replacing devices with ones rated for aluminum conductors. In some cases, replacing a circuit entirely is the better option. We assess what is there and explain which approach makes sense for the property.
An inspection makes sense before a property sale, after a renovation, or any time the electrical system has not been looked at in several years. We check the panel, the branch circuits, the grounding and bonding, and the protection devices throughout the property. Anything that does not meet current code gets noted, explained, and priced for correction.
The written report that comes out of an inspection is useful documentation for a landlord, a buyer, or a property manager who needs a baseline for what the electrical system looks like right now.
Rewiring is the right answer when the wiring itself is the problem, not just a single connection or device. Knob-and-tube wiring, deteriorated insulation, and circuits that were modified incorrectly over the years are all situations where repair patches the surface without fixing the underlying condition. We scope rewiring jobs carefully, walking through what is involved and what the work will uncover before anything starts. Partial rewires address specific sections of a home where the wiring is the issue. Whole-home rewires address it throughout.
We handle electrical work throughout Lakeland and across the surrounding area in Polk County. Combee Settlement, Crystal Lake, Fussels Corner, Lakeland Highlands, and Kathleen are all covered. If you are not sure whether your address falls within the service area, call and ask. We will confirm coverage and scope the job on the same call.
The full range of what we do is available throughout this area: repairs, panel upgrades, rewiring, lighting, ceiling fans, EV charger circuits, generator hookups, surge protection, pool wiring, and safety inspections.
In some cases, yes. We can discuss which parts of the work are most urgent and which can be deferred, and we scope each stage so you understand the cost and what it covers. Some jobs have a logical sequence where certain work has to come first regardless of preference. We explain that clearly on the call so you can make an informed decision about how to proceed.
Permit requirements depend on the type of work and where it is being done, and they vary between a city and the surrounding county. We confirm what applies at your address before the job starts. If a permit is required, we factor that into the scope and the timeline on the call.
A home inspector's report flags items for further evaluation by the relevant trade, and an electrical finding is a prompt to have the specific issue assessed properly. We can look at what the report describes, tell you what it actually means for the condition of the wiring, and give you a price to correct it if correction is needed. Not every flagged item is urgent, and we will tell you which ones are.
A home's electrical service enters on two legs, and a partial power loss where half the circuits are dead often means one of those legs has lost its connection, either at the service entrance, the meter, or the utility side of the connection. This is a situation that involves both us and the utility company. We assess the panel and the service entrance on our end and coordinate with the utility on theirs when the problem is upstream of the meter.
We plan the scope before we start so that the timeline is understood going in. If the job runs longer than expected, we communicate that directly and confirm what will and will not have power at the end of the first day. Work that spans multiple days is staged so the property is left in a safe condition each evening.
A brief description of the problem or the planned work is enough to get started. Knowing the approximate age of the property, whether the panel has been upgraded, and which circuits or areas are affected helps us scope the job more accurately on the call. You do not need a full diagnosis before you call. We will ask the right questions to get there.
Dead outlets, tripping breakers, and panel issues that surface during tenant turnovers are the most common calls we get from landlords and property managers in Lakeland. Aluminum wiring connections that have degraded over time are also a frequent finding in properties built in the 1960s and 1970s. We assess the situation on the call and give you a price before anything is scheduled.
Moving an appliance to a different wall usually means extending or rerouting the circuit that feeds it, which may involve running new wiring inside the wall and relocating the outlet. For a standard 120-volt appliance the work is straightforward. For a 240-volt appliance like a dryer or range, the run is more involved and the panel connection stays the same while the outlet moves. We scope it on the call.
If you are in Lakeland, Combee Settlement, Crystal Lake, Fussels Corner, Lakeland Highlands, Kathleen, or anywhere else in Polk County, call (813) 519-5955 to get a price and get it on the schedule.
We are available every day from 8:30 AM to 10:00 PM. Safe wiring. Solid workmanship. Straight answers. Call Plant City Electrical Company and we will take care of the circuits from here.
Also serving the towns around: Valrico, Fish Hawk, Bloomingdale, Brandon, Wesley Chapel. View our complete list of towns.
We handle electrical work for homes, rentals, and commercial properties across Lakeland and the surrounding area. The table below covers every service we offer, who it fits best, and a practical note to help you understand what the job actually involves.
Call (813) 519-5955 to get a price and talk through the scope before anything is scheduled.
| Type of Work | What It Covers | Best For | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service Upgrades |
| Homes running central air, an EV charger, or major appliances on an undersized service | Many older Lakeland homes came with 100-amp service. Adding modern loads to that panel puts ongoing stress on the breakers and the wiring. A 200-amp upgrade gives the system room to carry the full load modern households place on it. |
| Electrical Repairs & Troubleshooting |
| Homeowners and property managers dealing with an unexplained electrical problem | We trace the fault to its source before recommending a repair, so the fix addresses the actual problem rather than the surface symptom. |
| Breaker & Fuse Repair |
| Homes where a breaker trips repeatedly or will not reset | A breaker that keeps tripping is signaling a load or wiring issue, not just a bad breaker. We check both before recommending a path forward. |
Call (813) 519-5955 to describe what you are dealing with, get a price, and talk through the scope before anything is scheduled.
(813) 519-5955