F&J Electric has been the go-to electrical contractor for Plant City homeowners and business owners for nearly two decades. From a single tripped breaker to a full commercial wiring project, we handle it all with the same care and attention we would bring to our own homes. Whether you need a quick repair or a major service upgrade, our team of licensed electricians is ready to get the job done right. We serve Plant City, all of Hillsborough County, and the surrounding communities, and we are proud to be a familiar name in this area. Right diagnosis. Right wiring. Right the first time.
Seeing flickering lights or a warm outlet? Those are not quirks to ignore. They are signs that something in your wiring or electrical system needs attention, and catching them early almost always saves money and prevents bigger problems down the road.
Our electricians handle the full range of everyday electrical repairs. Flickering or dimming lights often point to a loose connection, an overloaded circuit, or a failing fixture. A dead outlet or one that feels warm to the touch can signal a wiring fault, a worn receptacle, or a GFCI that has tripped and needs resetting or replacement. A breaker that keeps tripping is usually telling you that a circuit is being asked to carry more than it was designed for, or that there is a fault somewhere in the line.
We troubleshoot all of it. Our electricians diagnose the actual source of the problem rather than guessing at it, and we give you honest recommendations on repairs, never an upsell. GFCI and AFCI protection is code-required in kitchens, bathrooms, garages, and outdoor areas, and we install and replace those outlets properly so your home stays up to current standards. We'll sort the wiring and clean up after.
Older homes in the Plant City area often carry panels that were sized for a much simpler time. When those homes were built, nobody was running multiple air conditioning units, electric vehicle chargers, and a full array of kitchen appliances off the same service. Panels that were adequate decades ago are now a bottleneck, and sometimes a hazard.
We handle breaker panel upgrades, 200-amp service upgrades, and main panel replacements for both residential and commercial properties. If your home or building needs more capacity, we start with a load calculation to understand exactly what the panel needs to carry, then we spec the right upgrade for the job. Dedicated circuit installation is part of this work too: dryers, ovens, refrigerators, and other major appliances each need their own circuit to run safely. Where a subpanel makes more sense than running everything back to the main panel, we handle that as well.
Transparent pricing with no hidden fees on any wiring job is how we operate. Before any panel work begins, you will know what the job involves and what it costs. Call and we'll get the current flowing right.
Here's what most people get wrong about their wiring: age alone is not the only concern. The type of wiring matters just as much. Homes built in Florida during certain eras were sometimes wired with aluminum rather than copper. Aluminum wiring can work safely, but it requires specific devices and connections to do so, and many older aluminum-wired homes have never been updated to meet that standard. If your home has aluminum wiring, an inspection is a smart first step.
We perform whole-home rewiring for homes where the existing wiring has reached the end of its useful life, where an inspection has flagged safety concerns, or where a homeowner is preparing to sell and wants a clean bill of health. Grounding and bonding are part of every rewiring project we do, because a properly grounded system is the foundation of a safe home.
Electrical safety inspections and pre-sale electrical inspections are available as standalone services. If you are buying, selling, or simply want to know the condition of your home's wiring, we will give you a thorough assessment with no pressure and no gimmicks, just safe, solid wiring. One call, and an electrician is on the way.
Electrical safety is not a checklist item. It is the reason we do the work the way we do it. Every repair, every installation, and every upgrade we complete is done to code, with the materials and methods that protect your family and your property long after we leave.
Licensed electricians perform all of the work we do. That matters because electrical work done incorrectly does not always fail immediately. It can create conditions that develop over months or years: loose connections that arc, undersized wiring that overheats, or missing ground-fault protection in areas where water is present. We do not cut corners, and we do not leave a job until it is right.
Whether it's a single outlet or a full panel upgrade, the goal is the same: get the work done cleanly, correctly, and without disrupting your day more than necessary.
Florida heat makes ceiling fans one of the most practical electrical upgrades a homeowner can make. A properly installed ceiling fan in the right location can make a room feel significantly cooler without adding to your energy bill the way air conditioning does. We install and replace ceiling fans in bedrooms, living rooms, covered patios, and any other space where one makes sense.
Light fixture installation and replacement, recessed lighting retrofits, and under-cabinet lighting are all part of what we do. Outdoors, we install security lighting, motion sensor lights, flood lights, porch lights, landscape lighting, and weatherproof exterior outlets. Outdoor lighting in Hillsborough County needs to be rated for heat, humidity, and the occasional hard rain. We spec and install fixtures built to hold up in this environment.
EV adoption is growing steadily across the Tampa metro and Plant City area. A Level 2 home charging station is the practical choice for most EV owners: it charges significantly faster than a standard outlet and can be installed in a garage or carport with the right circuit. Before installation, we check your panel's current capacity and let you know whether an upgrade is needed to support the charger safely. The wiring is done to code, and the result is a reliable home charging setup built to last.
Florida hurricane season is not a hypothetical. Power outages in this region can last hours or days, and a properly wired standby generator or transfer switch is the difference between riding it out comfortably and losing everything in the freezer. We install generator transfer switches and connect standby generators to your home's electrical system so that when the grid goes down, your power comes on automatically. We show up on time and ready to wire.
Florida leads the country in lightning strikes, and the Plant City area gets its share. A whole-home surge protector installed at the panel is the most effective way to protect your appliances, electronics, and wiring from the voltage spikes that follow a nearby strike or a utility fluctuation. It is a straightforward installation with real, lasting value for any home in this region.
What sets our electricians apart is straightforward: we bring the same level of care to a homeowner's outlet repair as we do to a commercial panel upgrade or a new construction rough-in. Both types of work matter, and both types of customers deserve an electrician who shows up prepared.
For homeowners, we handle everything from hardwired smoke detector and carbon monoxide detector installation to bathroom exhaust fan wiring, hot tub electrical hookups, and pool and spa wiring. Pool wiring is a genuine local need in Florida, and it requires specific code compliance to be done safely. We know the requirements and follow them.
For commercial clients, including property managers, retail tenants, and office owners, we handle commercial panel upgrades, commercial lighting installation, and new construction rough-in work. If your business is expanding, renovating, or simply needs an electrical system that can keep up with current demand, we are the contractor to call.
Every electrical job is different, which is why we do not quote prices before we understand the scope of the work. What we can tell you is that when you call, we will give you a clear, accurate estimate before any work begins. No surprises. No fees that appear after the fact.
We offer same-day scheduling for many jobs, and we are available around the clock for electrical emergencies. A burning smell, a panel that has gone dead, or a situation that feels unsafe is not something to wait on. Our electricians are available after hours and on weekends because electrical problems do not keep business hours.
We are based in Plant City and serve the surrounding communities throughout Hillsborough County and the nearby area. Our service area includes Brandon, Valrico, Seffner, Dover, Zephyrhills, and the broader Tampa metro. We're your neighbors, and we treat every job that way.
When you call, you reach someone who knows the area, knows the housing stock, and can get an electrician to your door without delay. Local service means faster response and a team that is genuinely invested in the community it works in.
We have been serving Plant City homeowners and businesses for nearly two decades. In that time we have built a reputation as a familiar name in Hillsborough County, and we take that history seriously. We're your neighbors, and we treat every job that way.
All work is performed by licensed electricians, not helpers working unsupervised. We do not send someone to your home who is not qualified to handle the job safely and correctly. That applies to a single outlet repair and to a full commercial panel upgrade alike.
We work with homeowners, landlords, property managers, retail tenants, small businesses, and commercial property owners throughout Plant City and the surrounding area. Whether the job is a straightforward repair at a single-family home or a tenant improvement project at a commercial space, we bring the same level of care to it.
We treat your home with the same care we would bring to our own. That means being mindful of floors, walls, and finishes when we are running wire or accessing panels, cleaning up our work area when the job is done, and not leaving a mess behind. Quick to arrive. Careful with your home. Clean when we leave.
Yes. Work that requires a permit is performed with the proper permit pulled and the inspection process followed. Permitted work protects you as a homeowner and ensures the installation is documented correctly for future sales, insurance, and code compliance purposes.
We stand behind the work our licensed electricians do. If something we installed or repaired does not hold up, call us and we will make it right. We do not consider a job finished until it is done correctly.
When you call, you reach someone who knows the area and can get an electrician scheduled without delay. For urgent situations, same-day response is our goal. We are available every day from 9:00 AM to 11:00 PM, and we take after-hours calls for emergencies that cannot wait.
Yes. Our electricians arrive prepared for the job, with the tools and materials needed to complete the work correctly. We show up on time and ready to wire, and we leave the space cleaner than we found it.
F&J Electric is ready to help with whatever your home or business needs. From a single repair to a full rewiring project, our licensed electricians bring the experience, the tools, and the work ethic to get it done right. Call us at (813) 519-5955 to request an estimate or schedule a service call. Same-day appointments are available, and we are here for emergencies around the clock. Quick to arrive. Careful with your home. Clean when we leave.
We handle the full range of residential and commercial electrical work in Plant City and across Hillsborough County. Whether the job is a single tripped breaker or a complete service upgrade, licensed electricians do the work to code, explain what they find in plain language, and leave the space clean. The table below covers what we do, who each service fits, and a few practical things worth knowing before you call.
| Type of Work | What It Covers | Best For | Worth Knowing |
|---|---|---|---|
| Surge and Lightning Protection | panel-level surge protection devices, point-of-use protection for sensitive equipment, post-storm wiring assessment, whole-home coverage | any home in the Tampa Bay region, which sees some of the highest lightning strike density in the country | A single nearby lightning strike can damage appliances and wiring throughout the house. Panel-level protection is the most effective first line of defense. |
| Wiring and Circuit Installation | whole-home rewiring, partial rewiring for older homes, new construction wiring, home addition circuits | older homes with aluminum or knob-and-tube wiring and properties undergoing additions or remodels | Aluminum and knob-and-tube wiring that has not been evaluated is a risk worth understanding before it becomes a problem. We assess and explain options clearly. |
| Outdoor and Dock Circuits | weatherproof outdoor outlet installation, deck and patio circuits, landscape and pathway lighting circuits, GFCI protection for outdoor areas | homeowners expanding outdoor living spaces and properties with docks or detached structures | All outdoor circuits require GFCI protection and weatherproof covers. Florida's humidity accelerates corrosion, so proper materials and sealing matter from day one. |
| Electrical Repairs and Troubleshooting | dead outlets, flickering or dimming lights, circuits that go dead without cause, GFCI and AFCI protection updates | homeowners and landlords dealing with an unexpected electrical problem | A proper diagnosis before any repair saves time and money. We trace the problem to the source before touching anything. |
| Electrical Safety Inspections | pre-purchase and pre-sale inspections, older home wiring evaluation, panel and grounding assessment, code compliance review | buyers, sellers, and landlords evaluating an older home before a transaction or renovation | A pre-purchase inspection is one of the smarter calls a buyer can make before closing on an older home in this area. It surfaces problems before they become your problem. |
| Dedicated Appliance Circuits | dryer and range circuits, refrigerator and dishwasher circuits, workshop and garage circuits, electrical supply side for AC units | homeowners adding large appliances, workshop equipment, or preparing for a new AC installation | Large appliances need their own dedicated circuit to run safely and efficiently. Sharing a circuit with other loads is a common cause of tripping breakers. |
| Lighting Installation | recessed and LED fixtures, pendants and chandeliers, under-cabinet lighting, security and motion sensor lights | homeowners updating interior lighting or adding exterior security lighting | Exterior lighting in Florida needs proper weatherproofing to hold up against humidity and storm exposure. We wire and seal it to last. |
| Whole-Home Generator Installation | transfer switch wiring, panel integration, automatic standby hookup, load sizing for the home | Plant City homeowners preparing for hurricane season and multi-day outages | Florida's storm season runs June through November. A properly wired standby generator starts automatically when the grid goes down, without any action on your part. |
| Breaker and Fuse Repair | breakers that trip repeatedly, fuse box evaluation, breaker replacement, circuit fault tracing | any property where a breaker keeps tripping or a fuse blows without a clear cause | A breaker that trips repeatedly is often a sign of an overloaded circuit or a wiring fault, not just a nuisance. We find out which before replacing anything. |
| Outlet and Switch Installation | GFCI and AFCI outlets, USB and dimmer switches, 240-volt outlets for appliances, aluminum wiring remediation | remodels, code updates, and homes adding new appliances or workshop equipment | Kitchens, bathrooms, garages, and outdoor areas all require GFCI protection by code. Older Plant City homes often need this updated. |
| Ceiling Fan Installation | fan replacement, new wiring where no ceiling box exists, outdoor-rated fan installation, proper box and support mounting | rooms without existing ceiling boxes and homeowners replacing older fans | Running new wiring for a ceiling fan where none exists is a common job. We handle the box, the circuit, and the fan in one visit when possible. |
| Pool and Spa Wiring | GFCI-protected pool circuits, bonding of all metal components, hot tub and spa dedicated circuits, outdoor subpanels for poolside loads | homeowners with existing pools or spas and those adding new backyard water features | Pool and spa electrical work has strict code requirements for GFCI protection and bonding. Humidity and outdoor exposure make proper weatherproofing essential in Florida. |
| Electrical Panel and Service UpgradesMost Popular | 200-amp service upgrades, fuse box to breaker panel conversions, load calculations, dedicated circuit additions | homes with older panels, added appliances, EV chargers, or heavy air-conditioning loads | Panel work requires a permit and utility coordination in most cases. We handle that process and make sure the inspection goes smoothly. |
How do I know if my home needs a panel or service upgrade?
A few signs point toward a panel that has reached its limit: breakers that trip under normal loads, a fuse box that has never been replaced, lights that dim when large appliances kick on, or a panel that simply has no open slots for new circuits. Homes built before the 1980s were often wired for far less load than a modern household puts on them. If any of those situations sound familiar, call us and we will assess the panel and run a load calculation to give you a clear picture.
What causes a breaker to trip repeatedly?
Repeated tripping usually means one of three things: the circuit is overloaded with more draw than it was designed to carry, there is a fault somewhere in the wiring or a connected device, or the breaker itself has worn out and is tripping at a lower threshold than it should. We trace the cause before recommending any fix, because replacing a breaker that is tripping due to a wiring fault does not solve the underlying problem.
Is electrical work permitted and inspected?
Most electrical work beyond simple repairs requires a permit, and panel upgrades and new circuit installations almost always do. We pull the permit, schedule the inspection, and make sure the work passes. Permitted work protects you at resale and confirms the job was done to current code. We handle that process so you do not have to.
Work Performed by Licensed Electricians
Every job, from a single outlet to a full service upgrade, is handled by licensed electricians who know the code and do the work right. We do not send helpers to work unsupervised.
How do I know if the wiring in my older home is safe?
Older homes in Plant City and across Hillsborough County may have aluminum wiring, knob-and-tube wiring, or panels that have not been evaluated in decades. None of those automatically means the home is unsafe, but each carries specific risks that are worth understanding. An electrical safety inspection gives you a clear picture of what is in the walls, what meets current code, and what, if anything, needs attention.
What does flickering or dimming lights usually mean?
Occasional flickering when a large appliance starts up can be normal, but lights that flicker frequently, dim under load, or flicker with no obvious cause are worth investigating. Common causes include loose connections, an overloaded circuit, a failing breaker, or a wiring problem somewhere in the run. Because some of those causes carry a fire risk, it is better to have an electrician trace the source than to wait and see.
Is a warm or buzzing outlet a problem?
Yes. An outlet that is warm to the touch or makes a buzzing sound is telling you something is wrong. It could be a loose connection, an overloaded circuit, or damaged wiring behind the wall. Any of those can become a fire hazard over time. If you notice either symptom, stop using that outlet and call us. We will diagnose it and fix it the right way.
Upfront Quotes With No Surprise Fees
You get a clear number before we start, and that number holds. If something changes the scope, we tell you before we proceed, not after the bill arrives.
What do I need for a Level 2 EV charger installation?
A Level 2 charger runs on a dedicated 240-volt circuit, typically a 50-amp line, depending on the charger. We start by checking whether the panel has the capacity and the open slots to support the new circuit. If it does not, we address that first. Then we run the dedicated line, install the proper breaker, and connect the charger to code. The whole process is straightforward when the panel is ready for it.
How does a whole-home generator hookup work?
A standby generator connects to your home through a transfer switch, which is wired to the panel. When the grid goes down, the transfer switch disconnects the home from utility power and connects it to the generator automatically. We handle the transfer switch installation, the panel integration, and the connection to the generator unit. The sizing of the generator itself determines which loads it can carry, and we can walk you through what makes sense for your home.
Same-Day and Emergency Availability
Urgent electrical problems do not wait for a convenient time slot. Same-day appointments are available for many calls, and we take after-hours and weekend calls when the situation cannot wait.
Do I need to be home when the electrician is working?
For most jobs, yes. We need access to the panel, the areas where work is being done, and sometimes the attic or crawl space. It also helps to have someone available who can answer questions if we find something unexpected during the job. If you cannot be present, let us know when you call and we will work out the best arrangement.
How does pricing work?
We give you a clear number before any work starts, and that number does not change unless the scope of the job changes and we talk to you about it first. There are no surprise line items after the fact. If the electrician finds something during the job that changes what is involved, we stop and explain it before proceeding. You decide what happens next.
When should I call an electrician instead of handling it myself?
Swapping a light bulb or resetting a tripped breaker is straightforward. Anything beyond that, including replacing outlets, adding circuits, working inside the panel, or investigating a wiring problem, is work where a mistake can cause a fire or a serious shock. Licensed electricians do this work every day and know where the risks are. The cost of a service call is almost always less than the cost of fixing a DIY repair that went wrong.
Every electrical situation is a little different, so call us and we will walk you through what the job involves, what it will cost, and how soon we can get an electrician to you.
(813) 519-5955